Yealink T46G

Configuring Basic Features
167
2. Enter the desired value in the Redial Tone field.
3. Click Confirm to accept the change.
Ringer Device for Headset
The Skype for Business phones support either or both speaker and headset ringer devices.
Ringer Device for Headset feature allows users to configure which ringer device to be used
when receiving an incoming call. For example, if the ringer device is set to Headset, ring tone will
be played through your headset.
If the ringer device is set to Headset or Headset&Speaker, the headset should be connected to
the Skype for Business phone and the headset mode also should be activated in advance. You
can press the HEADSET key to activate the headset mode. For more information, refer to the
Yealink phone-specific user guide .
Procedure
Ringer device for headset can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the ringer device for the
Skype for Business phone.
Parameters:
features.ringer_device.is_use_headse
t
Local
Web User Interface
Configure the ringer device for the
Skype for Business phone.
Navigate to:
http://<phoneIPAddress>/servlet?p
=features-audio&q=load