Yealink T46G Administrator's Guide

Yealink Skype for Business HD IP Phones Administrator Guide
26
Configuring Basic Network Parameters
In order to get your Skype for Business phones running, you must perform basic network setup,
such as IP address and subnet mask configuration. This section describes how to configure basic
network parameters for Skype for Business phones.
Note
DHCP
DHCP (Dynamic Host Configuration Protocol) is a network protocol used to dynamically allocate
network parameters to network hosts. The automatic allocation of network parameters to hosts
eases the administrative burden of maintaining an IP network. Skype for Business phones
comply with the DHCP specifications documented in RFC 2131. If using DHCP, Skype for
Business phones connected to the network become operational without having to be manually
assigned IP addresses and additional network parameters.
Procedure
DHCP can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure DHCP on the Skype for
Business phone.
Parameter:
network.internet_port.type
Local
Web User Interface
Configure DHCP on the Skype for
Business phone.
Navigate to:
http://<phoneIPAddress>/servlet?p
=network&q=load
Phone User Interface
Configure DHCP on the Skype for
Business phone.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
network.internet_port.type
0, 1 or 2
0
Description:
Configures the Internet (WAN) port type for IPv4.
This section mainly introduces IPv4 network parameters. Skype for Business phones also support
IPv6. For more information on IPv6, refer to IPv6 Support on page 253.

Yealink T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm