Yealink T46G

Yealink Skype for Business HD IP Phones Administrator Guide
48
Parameters
Permitted Values
Default
Port->IPv4->PPPoE->PPPoE Password
To configure PPPoE via web user interface:
1. Click on Network->Basic.
2. In the IPv4 Config block, mark the PPPoE radio box.
3. Enter the user name and password in corresponding fields.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5. Click OK to reboot the Skype for Business phone.
To configure PPPoE via phone user interface:
1. Press Menu->Advanced (default password: admin)->Network->WAN Port->IPv4.
2. Press or , or the Switch soft key to select the PPPoE from the Type field.
3. Enter the user name and password in the corresponding fields.
4. Press the Save soft key to accept the change.
The Skype for Business phone reboots automatically to make settings effective after a
period of time.
Configuring Transmission Methods of the Internet Port and PC
Port
Yealink T48G/T46G/T42G/T41P/T40P Skype for Business phones support two Ethernet ports: