Yealink Skype for Business HD IP Phones Administrator Guide
238
3. Enter the desired time interval in the Packet Interval (1~3600s) field.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5. Click OK to reboot the Skype for Business phone.
To configure CDP feature via phone user interface:
1. Press Menu->Advanced (default password: admin) ->Network->CDP->CDP Status.
2. Press or , or the Switch soft key to select the desired value from the CDP Status
field.
3. Enter the priority value (1-3600s) in the Packet Interval field.
4. Press the Save soft key to accept the change.
The Skype for Business phone reboots automatically to make settings effective after a
period of time.
Manual Configuration for VLAN
VLAN is disabled on Skype for Business phones by default. You can configure VLAN for the
Internet port and PC port manually. Before configuring VLAN on the Skype for Business phone,
you need to obtain the VLAN ID from your network administrator.
To Next Page
Loading...
