Yealink Skype for Business HD IP Phones Administrator Guide
16
Power specifications are listed below:
Power over Ethernet
With the included or a regular Ethernet cable, Skype for Business phones can be powered from a
PoE-compliant switch or hub.
To connect the PoE:
1) Connect the Ethernet cable between the Internet port on the Skype for Business phone and
an available port on the in-line power switch/hub.
Note
Initialization Process Overview
The initialization process of the Skype for Business phone is responsible for network connectivity
and operation of the phone in your local network.
Once you connect your Skype for Business phone to the network and to an electrical supply, the
If in-line power switch/hub is provided, you don’t need to connect the phone to the power
adapter. Make sure the switch/hub is PoE-compliant.
The Skype for Business phone can also share the network with another network device such as a
PC (personal computer). It is an optional connection.
Important! Do not unplug or remove the power while the Skype for Business phone is updating
firmware and configurations.
To Next Page
Loading...
