Yealink T46G Administrator's Guide

Yealink Skype for Business HD IP Phones Administrator Guide
246
Quality of Service
Quality of Service (QoS) is the ability to provide different priorities for different packets in the
network, allowing the transport of traffic with special requirements. QoS guarantees are
important for applications that require fixed bit rate and are delay sensitive when the network
capacity is insufficient. There are four major QoS factors to be considered when configuring a
modern QoS implementation: bandwidth, delay, jitter and loss.
QoS provides better network service through the following features:
 Supporting dedicated bandwidth
 Improving loss characteristics
 Avoiding and managing network congestion
 Shaping network traffic
 Setting traffic priorities across the network
The Best-Effort service is the default QoS model in IP networks. It provides no guarantees for
data delivering, which means delay, jitter, packet loss and bandwidth allocation are
unpredictable. Differentiated Services (DiffServ or DS) is the most widely used QoS model. It
provides a simple and scalable mechanism for classifying and managing network traffic and
providing QoS on modern IP networks. Differentiated Services Code Point (DSCP) is used to
define DiffServ classes and stored in the first six bits of the ToS (Type of Service) field. Each
router on the network can provide QoS simply based on the DiffServ class. The DSCP value
ranges from 0 to 63 with each DSCP specifying a particular per-hop behavior (PHB) applicable to
a packet. A PHB refers to the packet scheduling, queuing, policing, or shaping behavior of a
node on any given packet.
Four standard PHBs available to construct a DiffServ-enabled network and achieve QoS:
 Class Selector PHB -- backwards compatible with IP precedence. Class Selector code
points are of the form “xxx000”. The first three bits are the IP precedence bits. These class
selector PHBs retain almost the same forwarding behavior as nodes that implement IP
precedence-based classification and forwarding.
 Expedited Forwarding PHB -- the key ingredient in DiffServ model for providing a
low-loss, low-latency, low-jitter and assured bandwidth service.
 Assured Forwarding PHB -- defines a method by which BAs (Bandwidth Allocations) can
be given different forwarding assurances.
 Default PHB -- specifies that a packet marked with a DSCP value of “000000” gets the
traditional best effort service from a DS-compliant node.
VoIP is extremely bandwidth and delay-sensitive. QoS is a major issue in VoIP implementations,
regarding how to guarantee that packet traffic not be delayed or dropped due to interference
from other lower priority traffic. VoIP can guarantee high-quality QoS only if the voice and the
SIP packets are given priority over other kinds of network traffic. Skype for Business phones
support the DiffServ model of QoS.

Yealink T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm