Yealink T46G

Yealink Skype for Business HD IP Phones Administrator Guide
162
Call Waiting
Call waiting allows Skype for Business phones to receive a new incoming call when there is
already an active call. The new incoming call is presented to the user visually on the LCD screen.
Call waiting tone allows the Skype for Business phone to play a short tone, to remind the user
audibly of a new incoming call during conversation. Call waiting tone works only if call waiting is
enabled. You can customize call waiting tone or select specialized tone sets (vary from country
to country) for your Skype for Business phone. For more information, refer to Tones on page
269.
Procedure
Call waiting and call waiting tone can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure call waiting and call
waiting tone.
Parameters:
call_waiting.enable
call_waiting.tone
Local
Web User Interface
Configure call waiting.
Navigate to:
http://<phoneIPAddress>/servlet?p
=features-general&q=load
Configure call waiting tone.
Navigate to:
http://<phoneIPAddress>/servlet?p
=features-audio&q=load
Phone User Interface
Configure call waiting and call
waiting tone.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
call_waiting.enable
0 or 1
1
Description:
Enables or disables call waiting feature.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), a new incoming call is automatically rejected by the Skype for
Business phone with a busy message while during a call.