Yealink T46G

Yealink Skype for Business HD IP Phones Administrator Guide
214
3. Press or , or the Switch soft key to select the desired pairing mode from the
BToE Pairing Mode field.
The default value is Auto.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
To use the BToE feature and sign in:
1. Download and install the Yealink BToE Connector application to your computer.
2. Sign into the Skype for Business client.
3. Enable BToE and pair your phone with your computer. For more information on how to
pair, refer to Better Together over Ethernet chapter in Yealink phone-specific user guide .
When no user signs into the phone, a logon dialog will pop up on the Skype for Business
client on your computer to prompt you to enter the password.
4. Enter your password and sign in.
Now you will sign into your phone with the same account on your client. You can manage
calls on your phone using the Skype for Business client.
EXP40 Expansion Module
The Yealink EXP40 expansion module is an ideal choice for receptionists, administrative
assistants, call center agents, power-users, and executives who need to handle large call
volumes on a daily basis.
Assigning Contacts to EXP40
You can connect an EXP40 expansion module to T48G/T46G Skype for Business phones only.
When your T48G/T46G is registered with a Skype for Business account, you can assign contacts
to EXP keys on your EXP40 expansion module, so that you can quickly call contact by pressing
the corresponding EXP key.
You can also monitor your Skype for Business contacts’ presence status from your expansion
module. For more information on contact’s presence, refer to Reading Icons on page 18.
To use EXP40 expansion modules, connect the Ext jack of the Skype for Business phone and the
Ext in jack of the expansion module using one supplied cord. If you need to connect multiple