Yealink T46G

Configuring Basic Features
199
Sample:
ms-subnet: 192.168.1.0.
<provisionGroup name="locationPolicy" >
<propertyEntryList >
<property name="EnhancedEmergencyServicesEnabled" >true</property>
<property name="LocationPolicyTagID" >user-tagid</property>
<property name="LocationRequired" >yes</property>
<property name="UseLocationForE911Only" >true</property>
<property name="EmergencyDialString" >910086</property>
<property name="EmergencyDialMask" >911;912</property>
<property
name="NotificationUri" >sip:7000@yealinkuc.com,sip:80040@yealinkuc.com</property>
<property name="ConferenceMode" >oneway</property>
When user dials an emergency number, the location of the user set in phone and the phone
number are sent out as a part of INVITE message.
Sample:
INVITE sip:+119@bor-ee.com;user=phone SIP/2.0
<location-info>
<civicAddress xmlns="urn:ietf:params:xml:ns:pidf:geopriv10:civicAddr">
<PC>361008</PC>
<country>CN</country>
<STS />
<PRD />
<HNS />
<POD />
<HNO />
<RD>Wanghailu</RD>
<A3>Xiamen</A3>
<A1>Fujian</A1>
<NAM />
<LOC>63</LOC>
</civicAddress>
</location-info>
Note
E911 Location Tip
The network administrator configures geographical location on Skype for Business Server for
users. After user signs in, the geographical location is downloaded via in-band provisioning.
If geographical location is not provisioned by the server and the LocationRequired property of
If user’s presence status is DND before dialing an emergency number, it will reset to Available
from DND when a 911 number is dialed.