Yealink T46G

Yealink Skype for Business HD IP Phones Administrator Guide
98
To configure web server type via web user interface:
1. Click on Network->Advanced.
2. Select the desired value from the pull-down list of HTTP.
3. Enter the desired HTTP port number in the HTTP Port(1~65535) field.
The default HTTP port number is 80.
4. Select the desired value from the pull-down list of HTTPS.
5. Enter the desired HTTPS port number in the HTTPS Port(1~65535) field.
The default HTTPS port number is 443.
6. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
7. Click OK to reboot the Skype for Business phone.
To configure web server type via phone user interface:
1. Press Menu->Advanced (default password: admin)->Network->Webserver Type.
2. Press or , or the Switch soft key to select the desired value from the HTTP Status
field.
3. Enter the desired HTTP port number in the HTTP Port field.
4. Press or , or the Switch soft key to select the desired value from the HTTP Status
field.
5. Enter the desired HTTPS port number in the HTTPS Port field.
6. Press the Save soft key to accept the change.