Yealink T46G

Configuring Basic Features
127
Parameters
Permitted Values
Default
If it is set to 1 (Enabled), the Skype for Business phone will play a key tone when a user
presses a send key.
Note: It works only if the value of the parameter “features.key_tone” is set to 1 (Enabled).
Web User Interface:
Features->Audio->Send Sound
Phone User Interface:
None
features.send_pound_key
0 or 1
0
Description:
Enables or disables the Skype for Business phone not to send any pound key when pressing
double #.
0-Disabled (Send one pound key by pressing double #)
1-Enabled (Do not send any pound key when pressing double #)
Note: It works only if the value of the parameter “features.key_as_send” is set to 1 (Enabled).
Web User Interface:
Features->General Information->Send Pound Key
Phone User Interface:
None
To configure a send key via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Key As Send.