Yealink T46G - Page 240

Yealink Skype for Business HD IP Phones Administrator Guide
226
Parameters
Permitted Values
Default
Web User Interface:
Directory->Multicast IP->Paging Priority Active
Phone User Interface:
None
multicast.receive_priority.priority
Integer from 0 to 10
10
Description:
Configures the priority of the voice call (a normal phone call rather than a multicast paging
call) in progress.
1 is the highest priority, 10 is the lowest priority.
0-Disabled
1-1
2-2
3-3
4-4
5-5
6-6
7-7
8-8
9-9
10-10
If it is set to 0 (Disabled), all incoming multicast paging calls will be automatically ignored
when a voice call is in progress.
If it is not set to 0 (Disabled), the Skype for Business phone will receive the incoming
multicast paging call with a higher or same priority than this value and ignore that with a
lower priority than this value when a voice call is in progress.
Web User Interface:
Directory->Multicast IP->Paging Barge
Phone User Interface:
None
To configure a listening multicast address via web user interface:
1. Click on Directory->Multicast IP.
2. Enter the listening multicast address and port number in the Listening Address field.
1 is the highest priority and 10 is the lowest priority.