Yealink T46G - Page 299

Configuring Audio Features
285
Configure the priority for the enabled
codec.
Navigate to:
http://<phoneIPAddress>/servlet?p=
account-codec&q=load&acc=0
Details of Configuration Parameters:
Parameters
Permitted Values
Default
account.1.codec.Y.enable
(Y ranges from 1 to 11)
0 or 1
Refer to the following
content
Description:
Enables or disables the specified codec for the account.
0-Disabled
1-Enabled
Default:
For T48G/T46G/T42G/T41P:
When Y=1, the default value is 1;
When Y=2, the default value is 1;
When Y=3, the default value is 0;
When Y=4, the default value is 0;
When Y=5, the default value is 1;
When Y=6, the default value is 1;
When Y=7, the default value is 0;
When Y=8, the default value is 0;
When Y=9, the default value is 0;
When Y=10, the default value is 0;
When Y=11, the default value is 0;
For T40P:
When Y=1, the default value is 1;
When Y=2, the default value is 1;
When Y=3, the default value is 1;
When Y=4, the default value is 1;
When Y=5, the default value is 0;
When Y=6, the default value is 0;
When Y=7, the default value is 0;
When Y=8, the default value is 0;