Yealink T46G - Page 328

Yealink Skype for Business HD IP Phones Administrator Guide
314
Details of Configuration Parameters:
Parameters
Permitted Values
Default
security.trust_certificates
0 or 1
1
Description:
Enables or disables the Skype for Business phone to only trust the server certificates in the
Trusted Certificates list.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the Skype for Business phone will trust the server no matter
whether the certificate sent by the server is valid or not.
If it is set to 1 (Enabled), the Skype for Business phone will authenticate the server
certificate based on the trusted certificates list. Only when the authentication succeeds, the
Skype for Business phone will trust the server.
Note: If you change this parameter, the Skype for Business phone will reboot to make the
change take effect.
Web User Interface:
Security->Trusted Certificates->Only Accept Trusted Certificates
Phone User Interface:
None
security.ca_cert
0, 1 or 2
2
Description:
Configures the type of certificates in the Trusted Certificates list for the Skype for Business
phone to authenticate for TLS connection.
0-Default Certificates
1-Custom Certificates
2-All Certificates
Note: If you change this parameter, the Skype for Business phone will reboot to make the
change take effect.
Web User Interface:
Security->Trusted Certificates->CA Certificates
Phone User Interface:
None
security.cn_validation
0 or 1
0