Yealink T46G - Page 340

Yealink Skype for Business HD IP Phones Administrator Guide
326
Parameters
Permitted Values
Default
network.802_1x.md5_password
String within 32 characters
Blank
Description:
Configures the password for 802.1x authentication.
Example:
network.802_1x.md5_password = admin123
Note: It works only if the value of the parameter “network.802_1x.mode” is set to 1, 3, 4, 5,
6 or 7. If you change this parameter, the Skype for Business phone will reboot to make the
change take effect.
Web User Interface:
Network->Advanced->802.1x->MD5 Password
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->802.1x ->MD5 Password
network.802_1x.root_cert_url
URL within 511 characters
Blank
Description:
Configures the access URL of the CA certificate.
Example:
network.802_1x.root_cert_url = http://192.168.1.10/ca.pem
Note: It works only if the value of the parameter “network.802_1x.mode” is set to 2, 3, 4, 5,
6 or 7. The format of the certificate must be *.pem, *.crt, *.cer or *.der.
Web User Interface:
Network->Advanced->802.1x->CA Certificates
Phone User Interface:
None
network.802_1x.client_cert_url
URL within 511 characters
Blank
Description:
Configures the access URL of the device certificate.
Example:
network.802_1x.client_cert_url = http://192.168.1.10/client.pem
Note: It works only if the value of the parameter “network.802_1x.mode” is set to 2
(EAP-TLS). The format of the certificate must be *.pem.
Web User Interface:
Network->Advanced->802.1x->Device Certificates