Yealink T46G

Yealink Skype for Business HD IP Phones Administrator Guide
340
You can also specify the severity level of the log to be reported to a log file. The default log level
is 3.
Log parameters are described below:
Module
Parameter
Description
Export System Log
Local
Export the log files to a local system (e.g.,
PC).
Server
Export the log files to a syslog server.
Global Log Level
Setting
Global log Level
Specify the severity level of the global log.
Max Log File Size
(1-3072KB)
Specify the maximum size of the global
log.
Module Log Level
Settings
Register Log Level
Specify the severity level of the registration
log.
Subscribe Log Level
Specify the severity level of the
subscription log.
Call Log Level
Specify the severity level of the call log.
Ice Log Level
Specify the severity level of the ICE log.
Btoe Log Level
Specify the severity level of the BToE log.
Exchange Log Level
Specify the severity level of the Exchange
log.
In the configuration files, you can use the following parameters to configure system log settings:
 syslog.log_level -- Specify the system log level. The following lists the log level of events
you can log:
0: system is unusable
1: action must be taken immediately
2: critical condition
3: error conditions
4: warning conditions
5: normal but significant condition
6: informational
debug
 syslog.mode – Specify the system log to be exported to the syslog server or local system.
 syslog.server -- Specify the IP address or domain name of the syslog server to which the
log will be exported.