Yealink T46G

Getting Started
43
Parameters
Permitted Values
Default
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->WAN Port->IPv4->Static
IP->Subnet Mask
network.internet_port.gateway
IPv4 Address
Blank
Description:
Configures the IPv4 default gateway.
Example:
network.internet_port.gateway = 192.168.1.254
Note: It works only if the value of the parameter “network.ip_address_mode” is set to 0
(IPv4) or 2 (IPv4 & IPv6), and "network.internet_port.type" is set to 2 (Static IP Address). If
you change this parameter, the Skype for Business phone will reboot to make the change
take effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->Gateway
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->WAN Port->IPv4->Static
IP->Gateway
network.primary_dns
IPv4 Address
Blank
Description:
Configures the primary IPv4 DNS server.
Example:
network.primary_dns = 202.101.103.55
Note: It works only if the value of the parameter “network.ip_address_mode” is set to 0
(IPv4) or 2 (IPv4 & IPv6), and "network.internet_port.type" is set to 2 (Static IP Address). If
you change this parameter, the Skype for Business phone will reboot to make the change
take effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->Primary DNS
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->WAN Port->IPv4->Static
IP->Primary DNS
network.secondary_dns
IPv4 Address
Blank