Yealink T46G

Yealink Skype for Business HD IP Phones Administrator Guide
46
Business phones.
Procedure
PPPoE can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure PPPoE on the Skype for
Business phone.
Parameters:
network.internet_port.type
<y0000000000xx>.cfg
Configure the user name and
password for PPPoE on the Skype
for Business phone.
Parameters:
network.pppoe.user
network.pppoe.password
Local
Web User Interface
Configure PPPoE on the Skype for
Business phone.
Configure the user name and
password for PPPoE on the Skype
for Business phone.
Navigate to:
http://<phoneIPAddress>/servlet?p
=network&q=load
Phone User Interface
Configure PPPoE on the Skype for
Business phone.
Configure the user name and
password for PPPoE on the Skype
for Business phone.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
network.internet_port.type
0, 1 or 2
0
Description:
Configures the Internet (WAN) port type for IPv4.
0-DHCP
1-PPPoE (not applicable to T42G/T41P/T40P Skype for Business phones)
2-Static IP Address
Note: It works only if the value of the parameter “network.ip_address_mode” is set to 0