Yealink T46G

Getting Started
53
Parameters
Permitted Values
Default
Description:
Enables or disables the PC (LAN) port.
0-Disabled
1-Auto Negotiation
Note: If you change this parameter, the Skype for Business phone will reboot to make the
change take effect.
Web User Interface:
Network->PC Port->PC Port Active
Phone User Interface:
None
To enable the PC port via web user interface:
1. Click on Network->PC Port.
2. Select Auto Negotiate from the pull-down list of PC Port Active.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click OK to reboot the Skype for Business phone.
To disable the PC port via web user interface:
1. Click on Network->PC Port.
2. Select Disabled from the pull-down list of PC Port Active.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click OK to reboot the Skype for Business phone.