Yealink T46G

Getting Started
57
auto_provision.weekly.end_time
auto_provision.weekly.dayofweek
Specify the access URL of firmware.
Parameter:
firmware.url
Configure the phone to be reset to
factory after an upgrade.
Parameter:
auto_provision.reset_factory.enable
Local
Web User Interface
Configure the way for the Skype for
Business phone to check for configuration
files.
Navigate to:
http://<phoneIPAddress>/servlet?p=setti
ngs-autop&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
auto_provision.power_on
0 or 1
1
Description:
Triggers the power on feature to on or off.
0-Off
1-On
If it is set to 1 (On), the Skype for Business phone will perform an auto provisioning process
when powered on.
Web User Interface:
Settings->Auto Provision->Power On
Phone User Interface:
None
auto_provision.repeat.enable
0 or 1
0
Description:
Triggers the repeatedly feature to on or off.
0-Off
1-On