Yealink T46G

Yealink Skype for Business HD IP Phones Administrator Guide
60
Parameters
Permitted Values
Default
Settings->Auto Provision->Day of Week
Phone User Interface:
None
firmware.url
URL within 511 characters
Blank
Description:
Configures the access URL of the firmware file.
Example:
firmware.url = http://192.168.1.20/28.8.0.50.rom
Note: If you change this parameter, the Skype for Business phone will reboot to make the
change take effect.
Web User Interface:
Settings->Upgrade->Select and Upgrade Firmware
Phone User Interface:
None
auto_provision.reset_factory.enable
0 or 1
0
Description:
Enables or disables the phone to be reset to factory after you upgrade the phone firmware.
0-Disabled
1-Enabled
Note: This parameter only take effect once. Next time you upgrade the phone firmware, the
phone will not be reset to factory.
To configure the way for the Skype for Business phone to check for configuration files via
web user interface:
1. Click on Settings->Auto Provision.