1-4
IM80B80T10E 21th Edition : Jul.1,2007-00
< 1.INTRODUCTION >
Partial Stopping (power-off for protecting the sensor)
The Power can be partially turned off if the sensor is replaced or pulled up and kept in the seawater
valve for a while.
Enter ‘0.1’ on the numeric keypad while the speed
and distance are displayed on the master indicator.
Only the lighting of the master indicator display and
the sensor exciting power are turned off.
Press the
key on the master indicator to
return to the normal operating state.
Other indicators and the CPU in the master unit are
still operating.
To Next Page
Loading...
Need help?
General
