1-5
IM80B80T10E 21th Edition : Jul.1,2007-00
< 1.INTRODUCTION >
1.3 Summary of Functions
Classication Function page
Indication
Master
indicator
LOG
Displays the speed and total distance 4-6
Displays the trip and total distance 4-6
Displays the longitudinal and transverse speeds (dual-
axis sensor system)
4-6
Displays the resultant speed direction of moving ship
(dual-axis sensor system)
4-6
GPS
Displays the speed and total distance (when backed up
by the GPS)
4-6
Speed
indicator
Displays the trip and total distance (when backed up by
the GPS)
4-6
Single-axis
Indicator the longitudinal speed by a needle pointing to
the reading
3-6
Dual-axis
Indicates the resultant speed and direction of a moving
ship by a needle pointing to the reading (dual-axis)
3-6
Indicates the longitudinal to transverse speed by a nee-
dle pointing to the reading (dual-axis)
3-6
Setting Master indicator
Test function 4-8
Alarm speed setting 4-9
GPS speed selection 4-9
Error code display mode 6-26
Mainte-
nance
Master indicator
Zero adjustment 6-6
Sensitivity adjustment 6-7
Span adjustment 6-8
Response-speed setting 6-2
Milepost 6-9
Display / alteration / deletion of milepost data 6-13
Display / alteration of the linearizer table 6-14
Selection of intermediate error compensation factor 6-24
Switching of the voltage output range 6-18
Setting of the GPS interface 6-16
Selection of sub-maintenance mode 6-24
Switch status display mode 6-25
Voltage check mode 6-25
Fixed voltage output mode 6-26