JOHNSON CONTROLS
9
SOLUTION XT UNIT MODEL NOMENCLATURE
FORM 102.20-N1
ISSUE DATE: 7/06/2016
LIST OF FIGURES (CONT'D)
FIGURE 46 - Electrical Connectors (Connected) .................................................................................................... 37
FIGURE 47 - Remove and Reposition Shipping Split Angle ................................................................................... 37
FIGURE 48 - Come-A-Long Attached to a Section ................................................................................................. 37
FIGURE 49 - Bring Shipping Splits Together ........................................................................................................... 37
FIGURE 50 - Applying Caulk to Seams ................................................................................................................... 38
FIGURE 51 - Installing Gaskets .............................................................................................................................. 38
FIGURE 52 - Solution XT Corner Connector Hole Plug (P/N 021-19568-000) ....................................................... 38
FIGURE 53 - Use Gasket (P/N 028-11883-010) at Shipping Split .......................................................................... 39
FIGURE 54 - Use Gasket (P/N 028-11873-010) to Door Frame at Shipping Split .................................................. 39
FIGURE 55 - Assembly of End Channel Shipping Split with a Solution XT Expanded Cabinet .............................. 40
FIGURE 56 - Come-A-Long Attached to a Section ................................................................................................. 41
FIGURE 57 - Remove Lifting Lugs in Expanded Cabinet........................................................................................ 41
FIGURE 58 - Electrical Connector (Not Connected) ............................................................................................... 41
FIGURE 59 - Electrical Connectors (Connected) .................................................................................................... 41
FIGURE 60 - Remove and Reposition Shipping Split Angle ................................................................................... 42
FIGURE 61 - Bring Shipping Splits Together ........................................................................................................... 42
FIGURE 62 - Fasten Bottom Lifting Lugs ................................................................................................................ 43
FIGURE 63 - Installing Gaskets .............................................................................................................................. 43
FIGURE 64 - Solution XT Corner Connector Hole Plug (P/N 021-19568-000) ....................................................... 43
FIGURE 65 - Tiered Solution XT AHU ..................................................................................................................... 43
FIGURE 66 - Second Tier Tie-Down Fastener Pack (P/N 386-03419-000) ............................................................ 44
FIGURE 67 - Apply Gaskets to Top Panel on Bottom Tier ...................................................................................... 44
FIGURE 68 - Guide Brackets Together ................................................................................................................... 44
FIGURE 69 - Solution XT Lights Tier Transition Drawing ........................................................................................ 45
FIGURE 70 - Assembling the End Channel Shipping Split with Energy Recovery Wheel ...................................... 46
FIGURE 71 - Installing Hood with Optional Moisture Eliminators............................................................................ 47
FIGURE 72 - Installing the Direct Coupled Actuator................................................................................................ 48
FIGURE 73 - Installing MZ Damper......................................................................................................................... 49
FIGURE 74 - Damper Shaft Extension Kit (P/N 026-33715-002) ............................................................................ 50
FIGURE 75 - Counterbalance Locked Into Place for Shipping................................................................................ 50
FIGURE 76 - Counterbalance Unlocked for Start-Up .............................................................................................. 50
FIGURE 77 - V-Max Grid Lamps ............................................................................................................................. 51
FIGURE 78 - Installing V-Mod Lamp ....................................................................................................................... 51
FIGURE 79 - Installing V-Max Grid Lamps .............................................................................................................. 51
FIGURE 80 - UV Control Panel Wiring (8 amps)..................................................................................................... 53
FIGURE 81 - UV Control Panel Wiring (Greater than 8 amps) ............................................................................... 54
FIGURE 82 - High and Low Connections for an in Fan Air Monitoring System....................................................... 56
FIGURE 83 - High and Low Connections and Associated Tubing for Fan Mounted Air Monitoring System ........... 56
FIGURE 84 - Port Locations for Fan Mounted Air Monitoring System .................................................................... 56
FIGURE 85 - Install Gasket Under Roof Overhang ................................................................................................. 57
FIGURE 86 - Apply Gasket to Pipe Chase .............................................................................................................. 58
FIGURE 87 - Install Pipe Chase Base Rail to AHU Base Rail................................................................................. 58
FIGURE 88 - Install Flanges.................................................................................................................................... 58
FIGURE 89 - Apply Caulk to Solution XT Base Rail ................................................................................................ 59
FIGURE 90 - Apply Caulk Between Pipe Chase and Solution XT AHU .................................................................. 59
FIGURE 91 - Install Pipe Chase to Solution XT Roof .............................................................................................. 59
FIGURE 92 - Install Cover Angle ............................................................................................................................. 59
To Next Page
Loading...
Need help?
General
