EasyManuals Logo
Home>Zebra>Scanner>DS2208

Zebra DS2208 Product Reference Guide

Zebra DS2208
398 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #111 background imageLoading...
Page #111 background image
SSI Interface 7 - 9
Example Transaction
The following example illustrates how to retrieve diagnostic information (Diagnostic Testing and Reporting
(Attribute #10061) decimal) from the scanner using encapsulation of RSM commands over SSI. Before sending an
RSM command, the host must send the RSM Get Packet Size command to query the packet size supported by the
device.
Command from Host to Query Packet Size Supported by Device
0A 80 04 00 00 06 20 00 FF FF FD 4E
Where:
0A 80 04 00 is encapsulation of RSM commands over SSI command header
00 06 20 00 FF FF is RSM Get Packet Size command
FD 4E is SSI command checksum
Response from Device with Packet Size Information
0C 80 00 00 00 08 20 00 00 F0 00 F0 FD 6C
Where:
0C 80 00 00 is encapsulation of RSM command over SSI command header
00 08 20 00 00 F0 00 F0 is RSM Get Packet Size response
FD 6C is SSI response checksum
Command from Host to Retrieve Diagnostic Information
0C 80 04 00 00 08 02 00 27 4D 42 00 FE B0
Where:
0C 80 04 00 is encapsulation of RSM commands over SSI command header
00 08 02 00 27 4D 42 00 is attribute Get command requesting attribute 10061 decimal
FE B0 is SSI command checksum
Response from Device with Diagnostic Information
21 80 00 00 00 1D 02 00 27 4D 41 01 42 00 0E 00 00 00 00 01 03 02 03 03 03 04 03 05 03 06 03 FF FF FC 15
Where:
21 80 00 00 00 1D 02 00 27 4D 41 01 42 00 0E 00 00 is encapsulation of RSM responses over SSI
command header
00 00 01 03 02 03 03 03 04 03 05 03 06 03 is attribute Get response which includes diagnostic report value
FF FF is attribute Get response, packet termination
FC 15 is SSI response checksum

Table of Contents

Other manuals for Zebra DS2208

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra DS2208 and is the answer not in the manual?

Zebra DS2208 Specifications

General IconGeneral
TypeHandheld bar code reader
Wavelength645 nm
Sensor typeLED
Scanner type1D/2D
Pitch reading angle-65 - 65 °
Motion tolerance (cm/s)13
Linear (1D) barcodes supportedCodabar, Code 11, Code 128, Code 39, Code 93, EAN-13, GS1 DataBar Expanded, Interleaved 2 of 5, MSI, U.P.C.
Optical sensor resolution (W x H)640 x 480 pixels
2D (matrix & stacked) barcodes supportedAztec Code, Composite Codes, Data Matrix, Han Xin, MaxiCode, Micro QR Code, PDF417, QR Code, TLC-39
Standard interfacesUSB, RS-232, RS-485, Keyboard wedge
Connectivity technologyWired
CertificationEN 60950-1 2ed + A11 + A1 + A12 + A2:2013, IEC 60950-1 2ed + A1 + A2, UL 60950-1, CAN/CSA-C22.2 No. 60950-1-07 IEC 62471 EN 55022 (Class B); EN 55032 (Class B) EN 55024 EN 61000-3-2 EN 61000-3-3 47 CFR Part 15, Subpart B, Class B ICES-003 Issue 6, Class B
Product colorBlack
LED indicatorsYes
Housing material-
International Protection (IP) codeIP42
Sustainability certificatesRoHS
Cables includedMicro-USB
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 95 %
Battery life100 h
Battery capacity2400 mAh
Power consumption250 mA
Power source typeDC
AC adapter output voltage5 V
Harmonized System (HS) code84716070
Weight and Dimensions IconWeight and Dimensions
Depth99 mm
Width66 mm
Height165 mm
Weight161.6 g

Related product manuals