Zebra DS2208

4 - 16 DS2208 Digital Scanner Product Reference Guide
Hands-Free Mode
Parameter # 630
SSI # F1h 76h
Scan one of the following bar codes to enable or disable hands-free mode:
• Enable Hands-Free Mode - When you place the scanner in a stand, it automatically triggers when
presented with a bar code. Lifting the scanner or pulling the trigger causes it to behave according to the
setting of the Trigger Mode on page 4-15.
• Disable Hands-Free Mode - The scanner behaves according to the setting of the Trigger Mode on page
4-15 regardless of whether it is hand-held or in stand.
*Enable Hands-Free Mode
(1)
Disable Hands-Free Mode
(0)