Zebra DS2208

User Preferences & Miscellaneous Options 4 - 15
Trigger Mode
Parameter # 138
SSI # 8Ah
Scan one of the following bar codes to select a trigger mode for the scanner:
• Standard (Level) - A trigger press activates decode processing. Decode processing continues until the bar
code decodes, you release the trigger, or the Decode Session Timeout on page 4-21 occurs.
• Presentation (Blink) - The scanner activates decode processing when it detects a bar code in its field of
view. After a period of non-use, the LEDs turn off until the scanner senses motion.
• *Auto Aim - The scanner projects the aiming pattern when lifted. A trigger press activates decode
processing. After two seconds of inactivity the aiming pattern shuts off.
Standard (Level)
(0)
Presentation (Blink)
(7)
*Auto Aim
(9)