Zebra DS2208

11 - 24 DS2208 Digital Scanner Product Reference Guide
EAN/JAN Zero Extend
Parameter # 39
SSI # 27h
Scan Enable EAN/JAN Zero Extend to add five leading zeros to decoded EAN-8 symbols to make them
compatible in length to EAN-13 symbols. Scan Disable EAN/JAN Zero Extend to transmit EAN-8 symbols as is.
UCC Coupon Extended Code
Parameter # 85
SSI # 55h
Scan Enable UCC Coupon Extended Code to decode UPC-A bar codes starting with digit ‘5’, EAN-13 bar codes
starting with digit ‘99’, and UPC-A/GS1-128 coupon codes. UPC-A, EAN-13, and GS1-128 must be enabled to
use this feature.
Enable EAN/JAN Zero Extend
(1)
*Disable EAN/JAN Zero Extend
(0)
Enable UCC Coupon Extended Code
(1)
*Disable UCC Coupon Extended Code
(0)
NOTE See UPC/EAN/JAN Supplemental Redundancy on page 11-16 to control autodiscrimination of the
GS1-128 portion (right half) of a coupon code.