Zebra DS2208

User Preferences & Miscellaneous Options 4 - 17
Hand-Held Decode Aiming Pattern
Parameter # 306
SSI # F0h 32h
Scan one of the following bar codes to select when to project the aiming pattern in hand-held mode:
• Enable
Hand-Held Decode Aiming Pattern - This projects the aiming pattern during bar code capture.
• Disable
Hand-Held Decode Aiming Pattern - This turns the aiming pattern off.
• Enable
Hand-Held Decode Aiming Pattern on PDF - This projects the aiming pattern when the scanner
detects a PDF bar code.
NOTE With Picklist Mode on page 4-19 enabled, the decode aiming pattern flashes even if you disable the
Hand-Held Decode Aiming Pattern.
*Enable Hand-Held Decode Aiming Pattern
(2)
Disable Hand-Held Decode Aiming Pattern
(0)
Enable Hand-Held Decode Aiming Pattern on PDF
(3)