Zebra DS2208

Symbologies 11 - 91
Han Xin
Parameter # 1167
SSI # F8h 04h 8Fh
Scan one of the following bar codes to enable or disable Han Xin.
Han Xin Inverse
Parameter # 1168
SSI # F8h 04h 90h
Scan one of the following bar codes to select a Han Xin inverse decoder setting:
•
Regular Only - The scanner decodes Han Xin bar codes with normal reflectance only.
•
Inverse Only - The scanner decodes Han Xin bar codes with inverse reflectance only.
•
Inverse Autodetect - The scanner decodes both regular and inverse Han Xin bar codes.
Enable Han Xin
(1)
*Disable Han Xin
(0)
*Regular Only
(0)
Inverse Only
(1)
Inverse Autodetect
(2)