Zebra DS2208

Symbologies 11 - 37
Transmit Code 39 Check Digit
Parameter # 43
SSI # 2Bh
Scan one of the following bar codes to transmit Code 39 data with or without the check digit.
Code 39 Full ASCII Conversion
Parameter # 17
SSI # 11h
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. Scan one
of the following bar codes to enable or disable Code 39 Full ASCII.
Transmit Code 39 Check Digit (Enable)
(1)
*Do Not Transmit Code 39 Check Digit (Disable)
(0)
NOTE Code 39 Check Digit Verification must be enabled for this parameter to function.
Enable Code 39 Full ASCII
(1)
*Disable Code 39 Full ASCII
(0)
NOTE You cannot enable Trioptic Code 39 and Code 39 Full ASCII simultaneously.
Code 39 Full ASCII to Full ASCII Correlation is host-dependent, and is therefore described in the ASCII
character set table for the appropriate interface. See Table I-1 on page I-1.