11 - 56 DS2208 Digital Scanner Product Reference Guide
Set Lengths for Codabar (continued)
Scan one of the following bar codes to select a length option:
• One Discrete Length - Decode only Codabar symbols containing a selected length. Select the length using
the bar codes in Appendix G, Numeric Bar Codes. For example, to decode only Codabar symbols with 14
characters, scan Codabar - One Discrete Length, and then scan 1, 4. To correct an error or change the
selection, scan Cancel on page G-3.
• Two Discrete Lengths - Decode only Codabar symbols containing either of two lengths. Select lengths
using the bar codes in Appendix G, Numeric Bar Codes. For example, to decode only Codabar symbols
containing either 2 or 14 characters, scan Codabar - Two Discrete Lengths, and then scan 0, 2, 1, 4. To
correct an error or change the selection, scan Cancel on page G-3.
• Length Within Range - Decode Codabar symbols with a specific length range. Select lengths using the
bar codes in Appendix G, Numeric Bar Codes. For example, to decode Codabar symbols containing
between 4 and 12 characters, scan Codabar - Length Within Range, and then scan 0, 4, 1, 2. To correct
an error or change the selection, scan Cancel on page G-3.
• Any Length - Decode Codabar symbols containing any number of characters within the scanner’s capability.
Codabar - One Discrete Length
Codabar - Two Discrete Lengths
*Codabar - Length Within Range
(Default: 4 - 55)
Codabar - Any Length
To Next Page
Loading...
