Zebra DS2208 - Page 271

Standard Default Parameters A - 5
Stop Bits N/A N/A 1 Stop Bit 8-9
Data Bits N/A N/A 8-bit 8-10
Check Receive Errors N/A N/A Enable 8-10
Hardware Handshaking N/A N/A None 8-11
Software Handshaking N/A N/A None 8-13
Host Serial Response Timeout N/A N/A 2 Sec 8-15
RTS Line State N/A N/A Low RTS 8-16
Beep on <BEL> N/A N/A Disable 8-16
Intercharacter Delay N/A N/A 0 msec 8-17
Nixdorf Beep/LED Options N/A N/A Normal Operation 8-18
Bar Codes with Unknown Characters N/A N/A Send Bar Code With
Unknown Characters
8-18
IBM 468X/469X Host Parameters
Port Address N/A N/A None 9-4
Convert Unknown to Code 39 N/A N/A Disable 9-5
RS-485 Beep Directive N/A N/A Ignore 9-5
RS-485 Bar Code Configuration
Directive
N/A N/A Ignore 9-6
Keyboard Wedge Host Parameters
Keyboard Wedge Host Types N/A N/A IBM AT Notebook 10-4
Bar Codes with Unknown Characters N/A N/A Send Bar Codes with
Unknown Characters
10-4
Keystroke Delay N/A N/A No Delay 10-5
Intra-keystroke Delay N/A N/A Disable 10-5
Alternate Numeric Keypad Emulation N/A N/A Enable 10-6
Quick Keypad Emulation N/A N/A Enable 10-6
Simulated Caps Lock N/A N/A Disable 10-7
Caps Lock Override N/A N/A Disable 10-7
Convert Case N/A N/A Do Not Convert 10-8
Function Key Mapping N/A N/A Disable 10-8
Table A-1 Parameter Defaults (Continued)
Parameter
Parameter
Number
SSI Number Default
Page
Number