Zebra DS2208 - Page 275

Standard Default Parameters A - 9
MSI Check Digits 50 32h One 11-61
Transmit MSI Check Digit 46 2Eh Disable 11-61
MSI Check Digit Algorithm 51 33h Mod 10/Mod 10 11-62
MSI Reduced Quiet Zone 1392 F8h 05h 70h Disable 11-62
Chinese 2 of 5
Chinese 2 of 5 408 F0h 98h Disable 11-63
Matrix 2 of 5
Matrix 2 of 5 618 F1h 6Ah Disable 11-63
Set Lengths for Matrix 2 of 5 619
620
F1h 6Bh
F1h 6Ch
4 - 55 11-64
Matrix 2 of 5 Check Digit 622 F1h 6Eh Disable 11-66
Transmit Matrix 2 of 5 Check Digit 623 F1h 6Fh Disable 11-66
Korean 3 of 5
Korean 3 of 5 581 F1h 45h Disable 11-67
Inverse 1D 586 F1h 4Ah Regular 11-68
GS1 DataBar
GS1 DataBar-14 338 F0h 52h Enable 11-69
GS1 DataBar Limited 339 F0h 53h Enable 11-69
GS1 DataBar Expanded 340 F0h 54h Enable 11-70
Convert GS1 DataBar to
UPC/EAN/JAN
397 F0h 8Dh Disable 11-70
GS1 DataBar Limited Margin Check 728 F1h D8h Level 3 11-71
GS1 DataBar Security Level 1706 F8h 06h AAh Level 1 11-72
Symbology-Specific Security Features
Redundancy Level 78 4Eh 1 11-73
Security Level 77 4Dh 1 11-75
1D Quiet Zone Level 1288 F8h 05h 08h 1 11-76
Intercharacter Gap Size 381 F0h 7Dh Normal 11-77
Table A-1 Parameter Defaults (Continued)
Parameter
Parameter
Number
SSI Number Default
Page
Number