ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 100 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Tap Anti-passback Setup on the Access Control interface.
Function Description
Function Name Description
Anti-passback
Direction
No Anti-passback: The Anti-Passback function is
disabled, which means successful verification
through either the master device or slave device
can unlock the door. The attendance state is not
saved in this option.
Out Anti-passback: The user can check-out only
if the last record is a check-in record otherwise an
alarm is raised. However, the user can check-in
freely.
In Anti-Passback: The user can check-in again
only if the last record is a check-
out record
otherwise an alarm is raised. However, the user
can check-out freely.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g