ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 67 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Authentication
Timeout(s)
The amount of time taken to display a successful
verification message.
Valid value: 1 to 9 seconds.
Face comparison
Interval(s)
After the interval identifying is clicked (selected),
for example, if the comparison interval is set to 5
seconds, then the face recognition will verify the
face every 5 seconds. Valid value: 0 to 9 seconds.
0 means continuous identifying, 1 to 9 means
identifying at intervals.
Face Parameters 9.3
Tap Face on the System interface to go to the Face parameter settings.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g