ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 111 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Appendix 1
Requirements of Live Collection and Registration of
Visible Light Face Images
1) It is recommended to perform registration in an indoor environment with an
appropriate light source without underexposure or overexposure on the face.
2) Do not place the device towards outdoor light sources like door or window or
other harsh light sources.
3) Dark-color apparels other than the background color are recommended for
registration.
4) Expose your face and forehead properly and do not cover your face and
eyebrows with your hair.
5) It is recommended to show a normal facial expression. (A smile is acceptable,
but do not close your eyes, or incline your head to any orientation).
6) Two images are required for persons with eyeglasses, one image with
eyeglasses and one other without them.
7) Do not wear accessories like scarf or mask that may cover your mouth or chin.
8) Please face right towards the capturing device and locate your face in the
image capturing area as shown in the image below.
9) Do not include more than one face in the capturing area.
10) A distance of 50cm to 80cm is recommended for capturing the image. (the
distance is adjustable, subject to body height).

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g