ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 79 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Slide Show Interval (s)
It is the time interval in switching between
different slide show pictures. The function can be
disabled, or you may set the interval between 3
and 999 seconds.
Idle Time to Sleep (m)
If the sleep mode is activated, and when there is
no operation in the device, then the device will
enter standby mode.
This function can be disabled or set a value
within 1-999 minutes.
Main Screen Style
The style of the main screen can be selected
according to the user preference.
Voice Settings 10.2
Tap Voice on the Personalize interface to configure the voice settings.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g