ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 35 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Note:
1) A name can take up to 36 characters.
2) The user ID may contain 1-14 digits by default, support number and
alphabetic
.
3) During the initial registration, you can modify your ID but not after the
registration.
4) If the message "Duplicated!" appears, you must choose a different User
ID because the one you entered already exists.
6.1.2 User Role
On the New User interface, tap on User Role to set the user’s duty as either
Normal User or Super Admin.
 Super Admin: The Super Administrator owns all management privileges
in the Device.
 Normal User: If the Super Admin is registered already in the device, then
the Normal Users will not have the privilege to manage the system and
can only access authentic verifications.
 User Defined Roles: The Normal User can also be assigned custom roles
with User Defined Role. The user can be permitted to access several
menu options as required.
Note: If the selected user role is the Super Admin, then the user must pass the
identity authentication to access the main menu. The authentication is based

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g