ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 20 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Verification Mode 4.6
4.6.1 Fingerprint Verification
 1:N Fingerprint Verification Mode
Compares the fingerprint that is being pressed onto the fingerprint reader with
all of the fingerprint data that is stored in the device.
The device enters the fingerprint authentication mode when a user presses
his/her finger onto the fingerprint scanner.
Please follow the correct way to place your finger onto the sensor. For details,
please refer to section Finger Positioning.
Verification is successful: Verification is failed:
 1:1 Fingerprint Verification Mode
Compares the fingerprint that is being pressed onto the fingerprint reader with
the fingerprints that are linked to User ID input via the virtual keyboard.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g