ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 82 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
 All Bell Schedules
Once the bell is scheduled, on the Bell Schedules interface, tap All Bell
Schedules to view the newly scheduled bell.
 Edit the Scheduled Bell
On the All Bell Schedules interface, tap on the required bell schedule, and tap
Edit to edit the selected bell schedule. The editing method is the same as the
operations of adding a new bell schedule.
 Delete a Bell
On the All Bell Schedules interface, tap the required bell schedule, tap Delete,
and then tap Yes to delete the selected bell.
Punch States Options 10.4
Tap Punch States Options on the Personalize interface to configure the
punch state settings.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g