ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 81 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Function Description
Function Name Description
Bell Status
Toggle to enable or disable the bell status.
Bell Time
Once the required time is set, the device
automatically triggers to ring the bell during that
time.
Repeat
Set the required number of counts to repeat the
scheduled bell.
Ring Tone
Select a ringtone.
Internal Bell Delay(s)
Set the replay time
of the internal bell. Valid
values range from 1 to 999 seconds.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g