ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 96 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Note:
1. The door is inaccessible for the whole day when the End Time occurs
before the Start Time (such as 23:57~23:56).
2. It is the time interval for valid access when the End Time occurs after the
Start Time (such as 08:00~23:59).
3. The door is accessible for the whole day when the End Time occurs after
the Start Time (such that Start Time is 00:00 and End Time is 23:59).
4. The default Time Zone 1 indicates that the door is open all day long.
Holidays 12.3
Whenever there is a holiday, you may need a distinct access time; but changing
everyone's access time one by one is extremely cumbersome, so a holiday
access time can be set that applies to all employees and the user will be able to
open the door during the holidays.
Tap Holidays on the Access Control interface to set the holiday access.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g