ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 91 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Access Control Options 12.1
Tap Access Control Options on the Access Control interface to set the
parameters of the control lock of the terminal and related equipment.
Function Description
Function Name Description
Gate Control Mode
It toggles between ON or OFF switch to get into
gate control mode or not.
When set to ON, the interface removes the Door
Lock Delay, Door Sensor Delay, and Door Sensor
Type options.
Door Lock Delay (s)
The length of time that the device controls the
electric lock to be in unlock state.
Valid value: 1~99 seconds.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g