ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 92 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Door Sensor Delay (s)
If the door is not locked and is left open for a
certain duration (Door Sensor Delay), an alarm
will be triggered.
The valid value of Door Sensor Delay ranges from
1 to 255 seconds.
Door Sensor Type
There are three Sensor types: None, Normal
Open, and Normal Closed.
None: It means the door sensor is not in use.
Normally Open: It means the door is always left
open when electric power is on.
Normally Closed: It means the door is always left
closed when electric power is on.
Verification Mode
The
supported verification mode includes
Password/Fingerprint/Card/
Face, Fingerprint
Only, User ID Only, Password,
Card Only,
Fingerprint/Password, Fingerprint/Card, User ID +
Fingerprint, Fingerprint + Password, Fingerprint +
Card, Fingerprint + Password + Card, Password +
Card, Password/Card, User ID + Fingerprint +
Password, Fingerprint + (Card/User ID), Face Only,
Face + Fingerprint, Face + Password, Face + Card,
Face + Fingerprint + Card,
Face + Fingerprint +
Password.
Door Available Time
Period
It sets the timing for the door so that the door is
accessible only during that period.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g