ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 93 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Normal Open Time
Period
It is the scheduled time-
period for "Normal
Open" mode so that the door is always open
during this period.
Master Device
While configuring the master
and slave devices,
you may set the state of the master as Out or In.
Out:
A record of verification on the master device
is a check-out record.
In: A record of verification on the master device is
a check-in record.
Slave Device
While configuring the master and slave devices,
you may set the state of the slave as Out or In.
Out: A record of verification on the slave device is
a check-out record.
In:
A record of verification on the slave device is a
check-in record.
Auxiliary Input
Configuration
Sets the door unlock time period and auxiliary
output type of the auxiliary terminal device.
Auxiliary output types include None, Trigger door
open, Trigger Alarm, Trigger door open and
Alarm.
Speaker Alarm
It transmits a sound alarm or disassembly alarm
from the local. When the door is closed or the
verification is successful, the system cancels the
alarm from the local.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g