ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 23 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
4.6.2 Facial Verification
 1:N Facial Verification Mode
It compares the acquired facial images with all face data registered in the
device. The following is the pop-up prompt box of comparison results.
 1:1 Facial Verification Mode
Compare the face captured by the camera with the facial template related to
the entered user ID.
Press on the main interface and enter the 1:1 facial verification mode.
Enter the user ID and click [OK].

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g