ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 101 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
In/Out Anti-passback: In this case, a user can
check-in only if the last record is a check-out or
the user can check-out only if the last record is a
check-in otherwise the alarm is triggered.
Duress Options Settings 12.6
Once a user activates the duress verification function with a specific
authentication method(s), and when he/she is under coercion and
authenticates using duress verification, the device unlocks the door as usual. At
the same time, a signal is sent to trigger the alarm as well.
On the Access Control interface, tap Duress Options to configure the duress
settings.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g