ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 112 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Requirements for Visible Light Digital Face Image
Data
The digital photo should be straight-edged, coloured, half-portrayed with only one
person, and the person should be uncharted and in casuals. Persons who wear
eyeglasses should remain to put on eyeglasses for getting photos captured.
 Eye Distance
200 pixels or above are recommended with no less than 115 pixels of distance.
 Facial Expression
A neutral face or smile with eyes naturally open are recommended.
 Gesture and Angel
The horizontal rotating angle should not exceed ±10°, elevation should not exceed
±10°, and depression angle should not exceed ±10°.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g