ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 48 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
8 Communication Settings
Communication Settings are used to set the parameters of the Network, Serial
Comm, PC Connection, Wi-Fi, Cloud Server, Wiegand, and Network Diagnosis.
Tap COMM. on the main menu.
Network Settings 8.1
When the device needs to communicate with a PC over the Ethernet, you need
to configure network settings and ensure that the device and the PC connect to
the same network segment.
Tap Ethernet on the Comm. Settings interface to configure the settings.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g